Purchased T2 version for Windows and installed. In the Across Center it states license needed. When I enter my product key I receive "Error ocurred. (Error Code: 28)" My license also appears in the Deactivated Product Key: input field as though I had received the key then deactivated it which I did not do.
Hello, Josh Cunningham, Thanks for your purchase. Please read the following description about the error code: Code: MessageId: TA_E_ENABLE_NETWORK_ADAPTERS Message code (in Hex): 0x1C Message code (in Decimal): 28 MessageText: There are network adapters on the system that are disabled and TurboActivate couldn't read their hardware properties (even after trying and failing to enable the adapters automatically). Enable the network adapters, re-run the function, and TurboActivate will be able to "remember" the adapters even if the adapters are disabled in the future. Note: The network adapters do not need an active Internet connections. They just need to not be disabled. Whether they are or are not connected to the internet/intranet is not important and does not affect this error code at all. On Linux you'll get this error if you don't have any real network adapters attached. For example if you have no "eth[x]", "wlan[x]", "en[x]", "wl[x]", "ww[x]", "sl[x]", "em[x]", or "p[x]p[y]" network interface devices. See: https://wyday.com/limelm/help/faq/#disabled-adapters If you need any further assistance, feel free to let us know.
